Stap 7: De definitieve schets
Nu moet ik alle drie schetsen om samen te stellen in een schets van de werken!
Ik gebruikte de klok-schets als de base toe te voegen van de andere twee schetsen aan. Ik voegde functionaliteit blok iButtons en de Arduino zal de laatste 10 items inloggen.
Het insect dat in mijn eerste schets was is nu vast. Als u de code die werd gepost hier vóór 2 oktober 2011, dan wijzigen deze code gebruikt. Als u al sleutelen met, laat het me weten en ik zal het uitleggen van een gemakkelijke manier om de bug fix.
De schets:
#include //adding the time-library #include //adding the LCD library #include //adding the iButton library LiquidCrystal lcd(11, 10, 5, 4, 3, 2); //the pins that the LCD is connected on int knoptijd = 400; //setting all the variables for the clock part(sorry for the Dutch names) int uur = 12; int minuut = 15; int seconde = 0; int dag = 10; int maand = 9; int jaar = 2011; int knopset = 9; int knopmode = 8; int setwaarde = 0; int modewaarde = 0; OneWire ds(12); //setting the variables for the iButton part byte addr[8]; int but1[6] = {0,149,107,48,13,0}; //*************the code of the iButtton**************** String name1 = "Burton"; //name should always be 6 digits byte uit1 = 1; int but2[6] = {0,65,177,47,13,0}; String name2 = "Aca "; byte uit2 = 1; int but3[6] = {0,235,75,138,9,0}; String name3 = "Peter "; byte uit3 = 1; int but4[6] = {0,3,0,0,0,0}; String name4 = "But 4 "; byte uit4 = 1; int but5[6] = {0,87,171,46,13,0}; String name5 = "Jelle "; byte uit5 = 1; String keyStatus=""; byte welkeBut = 0; String name = ""; String geheugen[10]= {"leeg10","leeg 9","leeg 8","leeg 7","leeg 6","leeg 5","leeg 4","leeg 3","leeg 2","leeg 1"}; int memHour[10]= {99,99,99,99,99,99,99,99,99,99}; int memMinute[10]= {99,99,99,99,99,99,99,99,99,99}; int memDay[10]= {99,99,99,99,99,99,99,99,99,99}; int memMonth[10]= {99,99,99,99,99,99,99,99,99,99}; int i = 0; void setup() { pinMode(knopset, INPUT); pinMode(knopmode, INPUT); pinMode(7, OUTPUT); //opening the door lcd.begin(20, 2); //set up the size of the LCD setTime(uur,minuut,seconde,dag,maand,jaar); //setting the starttime for the clock when it starts up } void loop(){ setklok(); //testing for times that must change digitalClockDisplay(); //displaying the clock delay(1000); getKeyCode(); //getting the iButton code testKeyCode(); //testing the iButton code modeklok(); } void setklok(){ //setting the clock modewaarde = digitalRead(knopmode); if (modewaarde == LOW){ //if the [mode]button is pusched lcd.clear(); lcd.print("tijd instellen"); lcd.setCursor(0, 1); //setting the hours lcd.print("uur: "); lcd.setCursor(9, 1); lcd.print(uur); lcd.print(" "); delay(knoptijd); modewaarde = digitalRead(knopmode); while (modewaarde == HIGH){ delay(knoptijd); setwaarde = digitalRead(knopset); if (setwaarde == LOW){ uur++; if (uur > 24) uur = 1; lcd.setCursor(9,1); lcd.print(uur); lcd.print(" "); } modewaarde = digitalRead(knopmode); } // setting the minutes lcd.setCursor(0, 1); lcd.print("minuut"); lcd.setCursor(9, 1); lcd.print(minuut); lcd.print(" "); delay(knoptijd); modewaarde = digitalRead(knopmode); while (modewaarde == HIGH){ delay(knoptijd); setwaarde = digitalRead(knopset); if (setwaarde == LOW){ minuut++; if (minuut > 59) minuut = 0; lcd.setCursor(9, 1); lcd.print(minuut); lcd.print(" "); } modewaarde = digitalRead(knopmode); } //setting the month lcd.setCursor(0, 1); lcd.print("maand "); lcd.setCursor(9, 1); lcd.print(maand); lcd.print(" "); delay(knoptijd); modewaarde = digitalRead(knopmode); while (modewaarde == HIGH){ delay(knoptijd); setwaarde = digitalRead(knopset); if (setwaarde == LOW){ maand++; if (maand > 12) maand = 1; lcd.setCursor(9, 1); lcd.print(maand); lcd.print(" "); } modewaarde = digitalRead(knopmode); } //setting the day lcd.setCursor(0, 1); lcd.print("dag "); lcd.setCursor(9, 1); lcd.print(dag); lcd.print(" "); delay(knoptijd); modewaarde = digitalRead(knopmode); while (modewaarde == HIGH){ delay(knoptijd); setwaarde = digitalRead(knopset); if (setwaarde == LOW){ dag++; if (maand == 1 || maand == 3 || maand == 5 || maand == 7 || maand == 8 || maand == 10 || maand == 12){ if (dag > 31) dag = 1; } if (maand == 4 || maand == 6 || maand == 9 || maand == 11){ if (dag > 30) dag = 1; } if (maand == 2){ if (dag > 28) dag = 1; } lcd.setCursor(9, 1); lcd.print(dag); lcd.print(" "); } modewaarde = digitalRead(knopmode); } setTime(uur,minuut,seconde,dag,maand,jaar); lcd.clear(); } } void digitalClockDisplay(){ //printing time and date lcd.setCursor(0,0); lcd.print(" "); lcd.setCursor(0,0); lcd.print(hour()); printDigits(minute()); lcd.print(" "); lcd.print(day()); lcd.print("/"); lcd.print(month()); lcd.print(" "); } void printDigits(int digits){ // utility function for digital clock display: prints preceding colon and leading 0 lcd.print(":"); if(digits < 10) lcd.print('0'); lcd.print(digits); } void getKeyCode(){ //getting the code from the iButton byte present = 0; byte data[12]; keyStatus=""; if ( !ds.search(addr)) { ds.reset_search(); return; } if ( OneWire::crc8( addr, 7) != addr[7]) { keyStatus="CRC invalid"; return; } if ( addr[0] != 0x01) { keyStatus="not DS1990A"; return; } keyStatus="ok"; ds.reset(); } void modeklok(){ //testing for the bottom-button ############################ setwaarde = digitalRead(knopset); if (setwaarde == LOW){ //if the [set]button is pusched lcd.clear(); lcd.print("Iem. buiten sluiten?"); lcd.setCursor(0, 1); //checking the memory lcd.print(geheugen[9]); lcd.print(" "); lcd.print(memHour[9]); lcd.print(":"); lcd.print(memMinute[9]); lcd.print(" "); lcd.print(memDay[9]); lcd.print("/"); lcd.print(memMonth[9]); lcd.print(" "); delay(knoptijd); setwaarde = digitalRead(knopset); i=8; while (modewaarde == HIGH){ if (setwaarde == LOW){ i--; lcd.setCursor(0,1); lcd.print(geheugen[i]); lcd.print(" "); lcd.print(memHour[i]); lcd.print(":"); lcd.print(memMinute[i]); lcd.print(" "); lcd.print(memDay[i]); lcd.print("/"); lcd.print(memMonth[i]); lcd.print(" "); delay(knoptijd); if(i==0){ lcd.clear(); lcd.setCursor(0, 1); //putting the last enter back on the screen lcd.print(geheugen[9]); lcd.print(" "); lcd.print(memHour[9]); lcd.print(":"); lcd.print(memMinute[9]); lcd.print(" "); lcd.print(memDay[9]); lcd.print("/"); lcd.print(memMonth[9]); lcd.print(" "); loop(); return; } } setwaarde = digitalRead(knopset); modewaarde = digitalRead(knopmode); } delay(knoptijd); i = 0; while(i == 0){ //keeping out iButton 1 lcd.setCursor(0,0); lcd.print("buitensluiten? ja->"); lcd.setCursor(0,1); lcd.print(name1); lcd.print(" nee->"); delay(knoptijd); //dubble waiting time here delay(knoptijd); modewaarde = digitalRead(knopmode); setwaarde = digitalRead(knopset); if (modewaarde == LOW){ uit1 = 0; lcd.setCursor(0,0); lcd.print("buitengesloten! "); //get out delay(1000); i=1; } if (setwaarde == LOW){ uit1 = 1; lcd.setCursor(0,0); lcd.print("mag er in "); //come in delay(1000); i=1; } } i = 0; while(i == 0){ //keeping out iButton 2 lcd.setCursor(0,0); lcd.print("buitensluiten? ja->"); lcd.setCursor(0,1); lcd.print(name2); lcd.print(" nee->"); delay(knoptijd); //dubble waiting time here delay(knoptijd); modewaarde = digitalRead(knopmode); setwaarde = digitalRead(knopset); if (modewaarde == LOW){ uit2 = 0; lcd.setCursor(0,0); lcd.print("buitengesloten! "); //get out delay(1000); i=1; } if (setwaarde == LOW){ uit2 = 1; lcd.setCursor(0,0); lcd.print("mag er in "); //come in delay(1000); i=1; } } i = 0; while(i == 0){ //keeping out iButton 3 lcd.setCursor(0,0); lcd.print("buitensluiten? ja->"); lcd.setCursor(0,1); lcd.print(name3); lcd.print(" nee->"); delay(knoptijd); //dubble waiting time here delay(knoptijd); modewaarde = digitalRead(knopmode); setwaarde = digitalRead(knopset); if (modewaarde == LOW){ uit3 = 0; lcd.setCursor(0,0); lcd.print("buitengesloten! "); //get out delay(1000); i=1; } if (setwaarde == LOW){ uit3 = 1; lcd.setCursor(0,0); lcd.print("mag er in "); //come in delay(1000); i=1; } } i = 0; while(i == 0){ //keeping out iButton 4 lcd.setCursor(0,0); lcd.print("buitensluiten? ja->"); lcd.setCursor(0,1); lcd.print(name4); lcd.print(" nee->"); delay(knoptijd); //dubble waiting time here delay(knoptijd); modewaarde = digitalRead(knopmode); setwaarde = digitalRead(knopset); if (modewaarde == LOW){ uit4 = 0; lcd.setCursor(0,0); lcd.print("buitengesloten! "); //get out delay(1000); i=1; } if (setwaarde == LOW){ uit4 = 1; lcd.setCursor(0,0); lcd.print("mag er in "); //come in delay(1000); i=1; } } i = 0; while(i == 0){ //keeping out iButton 5 lcd.setCursor(0,0); lcd.print("buitensluiten? ja->"); lcd.setCursor(0,1); lcd.print(name5); lcd.print(" nee->"); delay(knoptijd); //dubble waiting time here delay(knoptijd); modewaarde = digitalRead(knopmode); setwaarde = digitalRead(knopset); if (modewaarde == LOW){ uit5 = 0; lcd.setCursor(0,0); lcd.print("buitengesloten! "); //get out delay(1000); i=1; } if (setwaarde == LOW){ uit5 = 1; lcd.setCursor(0,0); lcd.print("mag er in "); //come in delay(1000); i=1; } } lcd.clear(); } } void testKeyCode(){ //check if the iButton presented is the right one lcd.setCursor(0, 1); if(keyStatus=="ok"){ if(addr[1] == but1[1] && addr[2] == but1[2] && addr[3] == but1[3] && addr[4] == but1[4] && uit1 == 1){welkeBut=1; name = name1;} if(addr[1] == but2[1] && addr[2] == but2[2] && addr[3] == but2[3] && addr[4] == but2[4] && uit2 == 1){welkeBut=2; name = name2;} if(addr[1] == but3[1] && addr[2] == but3[2] && addr[3] == but3[3] && addr[4] == but3[4] && uit3 == 1){welkeBut=3; name = name3;} if(addr[1] == but4[1] && addr[2] == but4[2] && addr[3] == but4[3] && addr[4] == but4[4] && uit4 == 1){welkeBut=4; name = name4;} if(addr[1] == but5[1] && addr[2] == but5[2] && addr[3] == but5[3] && addr[4] == but5[4] && uit5 == 1){welkeBut=5; name = name5;} if(welkeBut == 1 || welkeBut == 2 || welkeBut == 3 || welkeBut == 4 || welkeBut == 5){ lcd.print(name); lcd.print(" "); lcd.print(hour()); printDigits(minute()); lcd.print(" "); lcd.print(day()); lcd.print("/"); lcd.print(month()); lcd.print(" "); digitalWrite(7, HIGH); delay(500); digitalWrite(7, LOW); bewaren(); //put last visit in memory } if(welkeBut != 1 && welkeBut != 2 && welkeBut != 3 && welkeBut != 4 && welkeBut != 5){ digitalWrite(7, LOW); lcd.print(" "); lcd.setCursor(0, 1); byte i; for( i = 5; i >0; i--) { lcd.print(":"); lcd.print(addr[i], DEC); } delay(1000); lcd.setCursor(0, 1); lcd.print(" "); } } else { welkeBut = 0; if (keyStatus!="") { lcd.setCursor(0, 1); lcd.print(keyStatus); delay(1000); lcd.setCursor(0, 1); lcd.print(" "); } } } void bewaren(){ //put last visit in memory geheugen[0] = geheugen[1]; geheugen[1] = geheugen[2]; geheugen[2] = geheugen[3]; geheugen[3] = geheugen[4]; geheugen[4] = geheugen[5]; //every visit is moving one memory-location down geheugen[5] = geheugen[6]; geheugen[6] = geheugen[7]; geheugen[7] = geheugen[8]; geheugen[8] = geheugen[9]; geheugen[9] = name; //the newest visit is added memHour[0] = memHour[1]; //the same for the hours memHour[1] = memHour[2]; memHour[2] = memHour[3]; memHour[3] = memHour[4]; memHour[4] = memHour[5]; memHour[5] = memHour[6]; memHour[6] = memHour[7]; memHour[7] = memHour[8]; memHour[8] = memHour[9]; memHour[9] = hour(); memMinute[0] = memMinute[1]; memMinute[1] = memMinute[2]; memMinute[2] = memMinute[3]; memMinute[3] = memMinute[4]; memMinute[4] = memMinute[5]; memMinute[5] = memMinute[6]; memMinute[6] = memMinute[7]; memMinute[7] = memMinute[8]; memMinute[8] = memMinute[9]; memMinute[9] = minute(); memDay[0] = memDay[1]; memDay[1] = memDay[2]; memDay[2] = memDay[3]; memDay[3] = memDay[4]; memDay[4] = memDay[5]; memDay[5] = memDay[6]; memDay[6] = memDay[7]; memDay[7] = memDay[8]; memDay[8] = memDay[9]; memDay[9] = day(); memMonth[0] = memMonth[1]; memMonth[1] = memMonth[2]; memMonth[2] = memMonth[3]; memMonth[3] = memMonth[4]; memMonth[4] = memMonth[5]; memMonth[5] = memMonth[6]; memMonth[6] = memMonth[7]; memMonth[7] = memMonth[8]; memMonth[8] = memMonth[9]; memMonth[9] = month(); }
