Stap 2: Bluetooth communicatie Contd....
Gebruik van het apparaat
• (bijna) zelfstandig draadloze verbinding – moet externe toepassing op station diensten
[Toepassing] <> = [BlueTooth-apparaat]
Apparaat communicatie
• Configuratie van de client/Server (Master/Slave)
-Apparaten zijn inherent gelijk
-Application identiteit wordt bepaald
[[Clienttoepassing] <> = [BT Device]] <> = [[BT Device] <> = [servertoepassing]]
Software/Interface Stack
[Bluetooth Host]---• Bluetooth Host
↑-host Interface Controller stuurprogramma
|| – Fysieke buschauffeur
v
[Fysieke Bus]---• fysieke Bus
↑ – fysieke Bus Firmware
||
v
[Bluetooth-Hardware]---• Bluetooth-Hardware
-Host Controller Interface firmware
– Baseband controller
Verbinden apparaat
• Host Controller Interface – Hiermee controle interactie met Bluetooth-hardware
• Transport layer-fysieke verbinding tussen de host en Bluetooth-hardware
1. host Controller Interface
• Uniforme interface voor toegang tot de mogelijkheden van de hardware van de Bluetooth
• Bevat commando's voor de hardware sets
• Bevat ingang naar mogelijke gebeurtenissen
• Toegang tot foutcodes bevat
2. de vervoersmogelijkheden
• Standaard beschrijft drie indelingen voor gewone vervoer-USB-vervoer
• Universele Seriële Bus-RS232 vervoer, UART Transport
• Universal Asynchronous Receiver/Transmitter
• Seriële interface – kan worden ingesteld op instellingen voor RS232